OBD Dash Cam Hardwire Kit for 12-24V Vehicles with Low Voltage Protection

About this item

• [Dash Cam OBD Hardwire Kit]: This OBD II dash cam hard wire power charging cable kit is a model for most car dash cameras, GPS, radar, and dash cams on the market (Please note that this unit DOES NOT work with EV Car/Electric Vehicle)
• Show more
• [24h Parking / ACC Mode Switch]: " MODE -": will active your dashcam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; " MODE O": will active ACC mode which only supplier power when engine is on
• [Question 4: USB Type-C Connector]: Suitable to connect multiple devices (May not work with some phone charging protocol)
• [Low voltage protection]: It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it from draining the battery
• [Question 1: Does Not Power Off]: The ACC Mode"0", the OBD hardwire kit will power off in 20 minutes after the car engine is off(Time delay setup to provide power for car start/stop function)
• 1. We enjoyed the show so much.
• 2. The decision was made by the committee.
• 3. She is an excellent candidate for the job.
• 4. The dog barked loudly in the park.
• 5. They completed the project on time.
• [Question 3: Compatibility]: The OBD 2 connector is compatible with most gas and hybrid vehicles; it does not work with electric and plug-in hybrid vehicles.
• [Simple Plug-in Installation]: The OBD dash cam hardwire cable is easy to install by plugging it into your car's OBD connector and making sure it can power on your dashcam, then hide the extra wire; unlike other complex hardwire kits, you need to deal with fusebox and battery electricity
• [Clean and Space Saving]: By using this dash cam OBD hardwire kit you can easily hide the wire and cable to make your carpet looks cableless and clean; also this dash cam charger doesn't occupy your car's cigarette lighter port and allow you can use the port to charge other devices in your car.
• [Question 2: No Power]: The USB Type-C connector uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins